INDUSTRIAL HEATING TECHNOLOGY

THERMAX® thermal insulation moulded parts and insulation boards:
top quality – and as individual as your own needs.

THERMAX® thermal insulation moulded parts and insulation boards:
top quality – and as individual as your own needs.

With a uniquely versatile and individually tailored portfolio, THERMAX® moulded parts for biomass, oil and gas-fired condensing boiler technology offer the optimum fitout, for example, for combustion chamber, ash and cleaning doors.

Individually manufactured, custom-fit THERMAX® moulded parts

Classification temperature 1100 °C
Available in various qualities, e.g. in condensate-resistant THERMAX® HR quality for condensing technology or in the higher temperature-resistant THERMAX® H quality, classified up to 1200 °C.

Technical data

THERMAX® Moulded parts and insulation boards SF 400SF 450SF 600
Classification temperature
°C110011001100
Bulk density ± 5%
kg/m3 400475625
Cold compressive strength
N/mm21.52.54.0
Modulus of rupture
N/mm20.81.22.5
Thermal conductivity
(at mean temperature in W/mK)
200 °C
400 °C
600 °C
0.14
0.16
0.18
0.15
0.17
0.19
0.16
0.18
0.20
Thermal shrinkage (1100 °C/12h)%< 2.0< 2.0< 2.0
Thermal expansion, linear (20 – 700 °C)%0.90.90.9
Specific heat capacitykJ/kg K1.151.151.15

We are able to supply special formats and special thicknesses on request. We will be pleased to manufacture stampings, milled parts or cuttings according to your drawings.
The classification temperature should not be conflated with the maximum use temperature – especially if physical conditions such as tensile or pressure loads play a part. Generally, lower temperatures should be used for high temperature insulation. In these cases, our company’s engineering department will be happy to advise. Heat transfer calculations for this material can also be obtained from our engineering department.

Request Engineering Office